Thursday, December 29, 2011

Jewelry set - Tiger eye (Red/Browns)

The photo does not do this set justice! This is such a sparkly shiny set so nicely matched with the tiger eye. I am thinking this set will work out perfectly with the blouse I am planning on wearing to the Christmas party this year. This extra shiny jewelry should give just the right amount of sparkle to my outfit!

DebDuzScrappin

Tuesday, December 27, 2011

Project - Versailles "ATC Display"

Here is another fabulous project from ClubScrap - had to wait until after Christmas to share - as I sent it to my MIL for Christmas and didn't wanna spoil the surprise - just in case she wondered over to my blog for a look-see...

We received this kit - that created the 9 compartment ATC Display project, for hanging on the wall - in our 2011 Versailles Club Stamp kit. I decided that the photos from our lil impromptu photo shoot around the very vibrant neighborhood would go nicely into this project for a gift. I embellished the display unit with stamped and punched out 'leaves' (all folded and adhered on popdots to give a real 3D look) using all of the gorgeous autumn colors from the "Comfort Zone" kit.

The majority of the materials used in this project are from ClubScrap. TFL DebDuzScrappin

Sunday, December 25, 2011

Merry Christmas to ALL!!!


Merry Christmas to one and all - I certainly hope you all enjoy the season and spend quality time with loved ones.

This here is my Christmas card, using ClubScrap's "Comfort Zone" Digital kit. I just adored the digital extras in this kit, the flowers are wonderful!

TFL DebDuzScrappin

Saturday, December 24, 2011

Loopy Christmas Ornament

Here is a pretty simple ornament that the boys and I made up this year. I used some red patterned and green patterned papers from previous years retreat kits from ClubScrap.

Very simple project but be sure and have some paper clips handy to hold pieces together while the glue is drying.

Instructions:
Cut green pieces 5.5 in long and 1 inch wide. Red ones can be shorter, like maybe 4 inches. This doesn't have to be precise. Our ornament turned out fairly large, so if you want it smaller, cut your pieces shorter.

Fold a loop into each of the green pieces and adhere the two ends together. Now you could use roller
adhesive if you like, but i wanted to ensure it didn't fall apart in storage, so I used liquid adhesive for mine. In my case I used small clips to hold them together while drying.

Once you have all the green ones folded and adhered, and dried - then fold the red ones, put adhesive on both sides of the ends of both red flaps and adhere in between two green ones, again hold with a clip. Once those - sets of green/red/green dry - adhere all the sets together.
You can add an additional extra long folded piece for the 'hanger'. I cut mine about 8 inches long and 1/2in wide. I then cut and matted a circular photo in the center of the ornament.


The majority of the materials used in this project are from ClubScrap. TFL DebDuzScrappin

Friday, December 23, 2011

2 Tiered Beaded Ornamant

Here is a real quick easy ornament - it turns out pretty small - perfect for hanging on a tree! or you could even make these as attachments to your gifts as a small embellishment!

Instructions:
Cut (6) Red patterned pieces 3 in long and 1/2 in wide.
Cut (6) Green patterned paper pieces 3 in long and 1/2 in wide.
Cut (4) Red patterned pieces 2 in long and 1/2 in wide.
Cut (4) Green patterned paper pieces 2 in long and 1/2 in wide.

Once cut - poke or punch a small hole in each end, centering the hole about 1/4th in from each end. Use a bone folder to sort of train the paper into a bended crescent or "moon" shape (see photo). Take a 2 in head pin and feed all 12 of the 3 inch pieces onto it. make sure you go red/green/red/green and keep the pattern of the paper facing down as you add them. Now carefully - take the bottom (first one) paper and fold up, insert opposite ends hole onto the head pin. Repeat with the next piece of cardstock and the next until you have a complete "ball" created.

Repeat the same process with all of the 2 in pieces, creating another smaller 'ball'. Use a pair of jewelry pliers to finish off the 2 in head pin with a loop. From here you can add some beads to dangle from the ornament. From the other end of the headpin, add a piece of ribbon to use as a hanger.

Finished ornament is about 2in x 3in.

The majority of the materials used in this project are from ClubScrap. TFL DebDuzScrappin

Thursday, December 22, 2011

My gang! (Christmas 2011)

Here is my gorgeous lil gang all decked out for Christmas!

Merry Christmas to all of my wonderful followers!!

TFL DebDuzScrappin

Wednesday, December 21, 2011

Shadow Box Card - Version 3



Shadow Box Card

This is a pretty neat card. It folds flat for mailing, but then pops up once opened and it can stand up.

Supply list:
Cardstock
Rubberstamps
Bone folder/Scoring tool
Adhesive
Popdots
Instructions:

1. Cut (2) pieces of cardstock 7.25in X 5.25in.
2. While cardstock is laying horizontally, score
at 1/2in and 1in from each edge of cardstock.
3. On only ONE of the two pieces, cut out a
center opening. Do not cut this opening too close
to the left/right edges, otherwise when you fold
your card flat, you will see the folded pieces in
your cut out opening. So if you are scoring at ½ in
then you want to make sure you have a ½ in space
between score line and cut out opening.
4. Fold on score lines.
5. Glue the front to the back on the first folded flap
On each side of the card.
6. Embellish card as desired













The majority of the materials used in this project are from ClubScrap. TFL DebDuzScrappin

Sunday, December 18, 2011

Shadow Box Card - Version 2



Shadow Box Card

This is a pretty neat card. It folds flat for mailing, but then pops up once opened and it can stand up.

Supply list:
Cardstock
Rubberstamps
Bone folder/Scoring tool
Adhesive
Popdots
Instructions:

1. Cut (2) pieces of cardstock 7.25in X 5.25in.
2. While cardstock is laying horizontally, score
at 1/2in and 1in from each edge of cardstock.
3. On only ONE of the two pieces, cut out a
center opening. Do not cut this opening too close
to the left/right edges, otherwise when you fold
your card flat, you will see the folded pieces in
your cut out opening. So if you are scoring at ½ in
then you want to make sure you have a ½ in space
between score line and cut out opening.
4. Fold on score lines.
5. Glue the front to the back on the first folded flap
On each side of the card.
6. Embellish card as desired













The majority of the materials used in this project are from ClubScrap. TFL DebDuzScrappin

Thursday, December 15, 2011

Project - Raku "Books up my Sleeve"

This is a very cute little project from ClubStamp's Raku monthly kit. It has four little mini scrapbooks for adding photos.

For Butterfly:
1. I rubberstamped 3 identical butterfly images from the Papillion kit.

2. I inked the edges of the butterflies

3. Score lines along each side of the butterflies body and bend wings up.

4. I adhered the three butterflies together using popdots.

5. I used some spare jewelry 'headpins' on the butterfly for its little antennea.

6. Added liquid pearls on top of wings.

The majority of the materials used in this project are from ClubScrap. TFL DebDuzScrappin

Monday, December 12, 2011

Shadow Box Card - Have a Good One Bday

Shadow Box Card

This is a pretty neat card. It folds flat for mailing, but then pops up once opened and it can stand up.

Supply list:
Cardstock
Rubberstamps
Bone folder/Scoring tool
Adhesive
Popdots
Instructions:

1. Cut (2) pieces of cardstock 7.25in X 5.25in.
2. While cardstock is laying horizontally, score
at 1/2in and 1in from each edge of cardstock.
3. On only ONE of the two pieces, cut out a
center opening. Do not cut this opening too close
to the left/right edges, otherwise when you fold
your card flat, you will see the folded pieces in
your cut out opening. So if you are scoring at ½ in
then you want to make sure you have a ½ in space
between score line and cut out opening.
4. Fold on score lines.
5. Glue the front to the back on the first folded flap
On each side of the card.
6. Embellish card as desired













The majority of the materials used in this project are from ClubScrap. TFL DebDuzScrappin

Friday, December 9, 2011

ClubScrap Retreat Project 5 - Frame

Here is the 5th Project from the Clubscrap Retreat - it is a multi-layered frame, all of the inner edges are torn, and we made the frame from mat board.

The majority of the materials used in this project are from ClubScrap. TFL DebDuzScrappin

Tuesday, December 6, 2011

ClubScrap Retreat Project 4 - Envelope album

This is the 4th project from the ClubScrap 2011 Retreat - a fun album with tags all made out of Envelopes! Also in this class we used chalks in a bunch of different techniques and each technique is displayed throughout the album.






The majority of the materials used in this project are from ClubScrap. TFL DebDuzScrappin

Saturday, December 3, 2011

ClubScrap Retreat Project 3 - Field Journal

Here is the 3rd project from Retreat - it is a field journal. It has little pockets in it and tons of pages we handstitched - to hold lots of photos. Very fun project!!


The majority of the materials used in this project are from ClubScrap. TFL DebDuzScrappin

Wednesday, November 30, 2011

ClubScrap Retreat Project 2 - D-ring album

Here is the 2nd thing we made at Retreat! We made this album from scratch - it is a great D-Ring type album

The majority of the materials used in this project are from ClubScrap. TFL DebDuzScrappin

LinkWithin

Related Posts Widget for Blogs by LinkWithin